{"product_id":"honda-engine-support-blocks-1-5t-2-0l-hybrid","title":"Honda Engine Support Blocks – 1.5T \u0026 2.0L Hybrid","description":"\u003ch1 dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eHonda Engine Support Blocks – 1.5T \u0026amp; 2.0L Hybrid\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp dir=\"auto\"\u003eThese \u003cstrong\u003eEngine Support Blocks\u003c\/strong\u003e are designed to support the engine when the side engine mount is removed during repairs on Honda \u003cstrong\u003e1.5L Turbo and 2.0L Hybrid\u003c\/strong\u003e vehicles.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eNormally, once the side engine mount is removed, the engine must be supported with a jack under the oil pan or by lowering the vehicle onto support blocks. Both methods can limit movement of the vehicle on the lift and may require the engine to be repositioned or supported again each time the vehicle is raised or lowered.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThese blocks provide another solution. Each block sits directly on the \u003cstrong\u003esubframe\u003c\/strong\u003e and supports the shank of a long head bolt temporarily threaded into the engine oil pan. Once positioned, the engine is supported from the subframe, eliminating the need to continuously support the oil pan from underneath.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis allows the \u003cstrong\u003evehicle to be raised and lowered on the lift while maintaining engine support\u003c\/strong\u003e, making repairs that require repeated movement of the vehicle much more convenient.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eBlock Options \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eBlock 1 – 1.5L Turbo\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.5T Honda Accord\u003c\/li\u003e\n\u003cli\u003e1.5T Honda Civic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eBlock 2 – 1.5T CR-V \/ 2.0L Hybrid\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSide 1:\n\u003cul\u003e\n\u003cli\u003e1.5T Honda CR-V\u003c\/li\u003e\n\u003cli\u003e2.0L Hybrid Honda Civic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSide 2:\n\u003cul\u003e\n\u003cli\u003e2.0L Hybrid Honda Accord\u003c\/li\u003e\n\u003cli\u003e2.0L Hybrid Honda CR-V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eThe applicable vehicle is \u003cstrong\u003eprinted directly into the face of each block\u003c\/strong\u003e. When installed, the vehicle\/application marking facing you identifies the correct side of the block to use.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports the engine when the side engine mount is removed\u003c\/li\u003e\n\u003cli\u003eRests directly on the vehicle subframe\u003c\/li\u003e\n\u003cli\u003eUses the shank of a long head bolt threaded into the oil pan as the support point\u003c\/li\u003e\n\u003cli\u003eEliminates the need to continuously support the engine with a jack under the oil pan\u003c\/li\u003e\n\u003cli\u003eAllows the vehicle to be raised and lowered on the lift without resetting external support blocks\u003c\/li\u003e\n\u003cli\u003eApplication markings printed directly into the blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded magnets\u003c\/strong\u003e in the bottom help hold the blocks securely in position on the subframe\u003c\/li\u003e\n\u003cli\u003ePurpose-designed for the different engine heights and subframe configurations of each application\u003c\/li\u003e\n\u003cli\u003eFully 3D printed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eInstallation\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThread the appropriate long bolt into the oil pan and position the correct Engine Support Block on the subframe beneath the bolt shank.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe blocks are designed so the bolt shank sits snugly against the appropriate support surface when properly positioned.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e1.5T Civic Note:\u003c\/strong\u003e The 1.5T Civic engine sits slightly lower than the other applications. Because of this, the oil pan will need to be \u003cstrong\u003elifted slightly with a pry bar\u003c\/strong\u003e to create enough clearance to position the support block underneath the bolt.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eOnce the block is properly positioned, verify that the bolt shank is seated securely against the block before removing support from the engine.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eImportant\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThese blocks are intended to \u003cstrong\u003esupport the engine while the side engine mount is removed\u003c\/strong\u003e. Always verify that the block is correctly positioned on the subframe and that the support bolt is properly seated against the block before removing the engine mount.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThese tools are fully 3D printed. Minor surface variations or small discrepancies in the print are normal due to the printing process and do not affect performance.\u003c\/li\u003e\n\u003cli\u003eEmbedded magnets are used to help retain the blocks on the subframe during positioning.\u003c\/li\u003e\n\u003cli\u003eCertain brake cleaners may cause surface discoloration. This does not compromise tool function\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EnvisionAuto3D","offers":[{"title":"Both Blocks w\/ Headbolt","offer_id":49985995702421,"sku":null,"price":32.0,"currency_code":"USD","in_stock":true},{"title":"Both Blocks w\/o Headbolt","offer_id":49985995735189,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7242\/9717\/files\/rn-image_picker_lib_temp_a46cff4f-1a63-42e3-92e0-4a2ae582fcd9.jpg?v=1790278151","url":"https:\/\/ea3d.com\/products\/honda-engine-support-blocks-1-5t-2-0l-hybrid","provider":"EnvisionAuto3D","version":"1.0","type":"link"}